Manufacturer: STANLEY BOSTITCH
Brand: Stanley Bostitch
Bostitch 1-5/8" 18-Gauge Brads Coated finish eases insertion and helps it stay there, Chisel point allows the nail to slide in easily without disturbing the work surface, 1,000 brads included, Fits the bostitch tools: SB-1842BN, SB-2IN1, BT50B, SB-1850BN, BT200K-2
Manufacturer: WMH Tool Group
The Wilton Cam Action Drill Press Vise features an easy-to-use top locking lever that can tighten or loosen against the workpiece, exerting 400 to 1100 lbs. of holding pressure. Mount Type: Stationary, Jaw Length (in.): 8, Jaw Capacity (in.): 8 3/16, Handles (qty.): 2, Material: Steel
INCRA TSRT2832R 28-Inch by 32-Inch TS Router Table Top for Right Side of Blade, Fits Castings 27-Inch - 28-Inch Deep
The 28-Inch x 32-Inch Right hand table serves double duty as a table board and includes a full size 3/8-Inch x 3/4-Inch T-Slot miter channel. These tops are designed to support even the heaviest of production routers and lifts, and will work with any standard 9-1/4-Inch x 11-3/4-Inch mounting plate. All Incra Router Tables are shipped with a 3/8-Inch solid aluminum router mounting plate, pre-drilled for your router, featuring the exclusive Magna-Lock magnetic throat plate system. Changing any of the included throat plates is a snap with the Magna Lock System. Just drop in the selected plate. The high energy, rare-earth magnets hold the plate secure and perfectly flush every time. All of our mounting plates include 3 laser cut throat plates with a 1-Inch , 2-1/8-Inch and 3-5/8-Inch opening. Rather than the typical router plate leveling set screws that dig into the table's recess requiring constant re-adjustment, Incra's plate leveling system puts flat head levelers in the table, not in the router mounting plate. Access to these levelers is through the 10 access holes located around the perimeter of the mounting plate. Just insert the hex key in the access holes and turn to adjust. After leveling, a simple quarter turn of the corner mounted Cam-Lock securely holds the plate in the router table's recess. All table saw based router tables include the TS Router Table Support Kit with 4 brackets and 2 table stiffeners. The brackets can be positioned anywhere along the TS System's rail length and are vertically adjustable. The support kit is also available separately to support user made tables. The optional TS Leg set is a good choice for providing extra support at your table saw. Just slide the mounting brackets into the Incra Table Saw Fence System's T-slotted rails. The legs are horizontally adjustable to fit any table saw depth. The manufacturer offers 9 MagnaLOCK Mounting Plates pre-drilled to fit 34 different routers and 1 undrilled plate that the customer can drill to fit most other routers. To avoid possible -I...
The Goodyear Engineered Products Plicord Blast green rubber sand blasting hose assembly is suitable for a wide variety of industrial and commercial cleaning and finishing applications that use steel shot or sand as a medium, and consists of a tube constructed with Tufsyn (polybutadiene blend) for tensile strength, abrasion resistance, and static dissipation; and a cover made with four plies of green Plioflex (styrene-butadiene) for resistance to abrasion. Its spiral-plied synthetic fabric reinforcement provides the strength for its maximum working pressure rating of 150 pounds per square inch (psi). This hose can withstand temperatures ranging from -25 to +180 degrees F (-32 to +82 degrees C). It comes equipped with two factory-installed iron universal couplings. This hose is suitable for conveying steel shot or sand blasting in metal, stone, glass, or other cleaning or finishing applications.Industrial hoses and hose assemblies transfer or convey air or liquid in hose systems. When selecting industrial hoses or hose assemblies, use the STAMPED method to help determine the type of hose needed:S= Size (ID, OD, and length)T= Temperature (maximum and minimum temperatures of material being transported)A= Application (industry or process)M= Material (to be conveyed, type and concentration)P= Pressure (maximum working pressure)E= Ends (type of end connectors or couplings on hose)D= Delivery method (volume and velocity)The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. The hose must be capable of withstanding the minimum and maximum temperatures that occur within the hose system. Some applications require specialized oils or chemicals to be conveyed through the system. In this case, hose selection must ensure compatibility of the hose tube, cover, couplings and O-rings with the fluid used. Industrial hoses and hose assemblies are used in systems such as air compressors, automatic manufacturing operations, a...
Goodyear L815153G Steel Retractable Air Compressor/Water Hose Reel with 3/8 in. x 50 ft. Rubber Hose, Max. 300PSI
The Goodyear L815153G Steel Retractable Air Compressor/Water Hose Reel is manufactured using powder coated steel for strength and corrosion resistance. It can be wall, ceiling or floor mounted. The full flow solid swivel joint ensures smooth, uninterrupted fluid flow. The multi-position release ratchets spring is fully enclosed. The hose is guided by four non-snag rollers that guide retraction and reduce abrasion and wear on the hose.
Woodtek 165557, Portable Power Tool Accessories, Routers & Trimmers, Small Cast Iron Router Table 27" X 16"
The WoodtekÂ® Small Cast Iron Router Table, measuring 27" x 16", gives you the stability and durability that no mdf, laminate or phenolic router table top can provide. Cast iron has added benefits of absorbing vibration and sound better. The end result being truer and cleaner cuts with a quieter work environment. It will fit most any 27" deep table saw on the market on either the left or right side. Made to fit the WoodtekÂ® Deluxe Workbench Router Stand 165-563 . Will work with other inserts and router lifts having an 11-3/4" x 9-1/4" x maximum 7/16" thick plate with 3/4" radius corners. Imported. Please note that when the extension wing is attached to the table saw, the WoodtekÂ® 165-560 Fence Assembly will not be able to be used. The rails for the table saw fence prevent the attachment of the router fence mounting brackets. Insert opening: 11-3/4" x 9-1/4" x 3/4" corner radius. Workbench Top dimensions: 27" x 16" x 1-1/2". Two integrated dual-tracks: Slot for miter gauges and one for 1/4"-20 fasteners. Miter Gauge slot dimensions: 3/4" x 13/32" 1/4"-20 T-slot dimensions: 3/8" x 9/32" Distance from front edge to spindle center: 8" Distance from miter gauge slot center to spindle center: 5-7/16" Distance from 1/4"-20 T-slot center to spindle center: 6-3/4" Net weight: 48.4 lbs. Shipping Weight: 54.6 lbs.
BLUEROCK Â® Tools 1/8" - 6" Pipe Chain Vice on Tripod Pipe Stand Model 618
Manufacturer: BLUEROCK Tools
Brand: BLUEROCK Â® Tools
Model: Model 618
NEW! BLUEROCK Â® Tools 1/8" - 6" Pipe Chain Vice on Tripod Â· Tripod Specifications: Legs and Tray fold in for easy transport â€¢ Capacity of pipe able to be held: 1/8" - 6" â€¢ Numerous tool holding spaces on the tripod deck â€¢ Ceiling stabilizer with a lower T-bolt â€¢ Pipe Bending ability with the deck plate. This is new 6" Pipe Chain Vice Stand by BLUEROCK Â® Tools. This stand is compatible with a RIDGIDÂ® 72037 460. This is a high quality stand built to last. We find it to be comparable to the stands that go for $650 new. Please let us know if you have any questions. RIDGIDÂ® is a registered trade mark of RIDGID Inc. or the Ridge Tool Company and is only used for product identification purposes. SOME ASSEMBLY REQUIRED.
Phenolic is one of the strongest, most stable and durable materials available for an industrial strength work surface. Phenolic is the material of choice for woodworking pros and virtually renders melamine an obsolete option for long term professional use.